Description
ENGINE SYSTEM
• 4.4L 4-Cylinder AGCO Power
• EPA Tier 4 Final and CARB Certified
• Air Cleaner: Dual Element Dry Type
• Air Cleaner Intake, Under Hood
• Vertical Exhaust
• Cooling System: Antifreeze 50/50 Mix
• Cold Starting Aid: Intake Heater
FRONT AXLE
• 4wd: Dana 720 Center Driveline, Open Differential, Standard Hydraulically Actuated Differential Lock Push Button 4WD Engagement
POWERTRAIN
• Transmission: 25 mph (40 kph) 12 X 12 Synchro Power Shuttle (6 Gears, 2 Ranges with Declutch on Main Gear Lever)
• Rear Axle: Inboard Planetary Final Drives, with Push Button Operated Mechanical Differential Lock, Flanged Rear Axle
• Brakes: Independent Oil Immersed Wet Disc Brakes with Independent Foot Pedal Operation
• Hook and Lever Parking Brake
• PTO: Independent 540/540E/1000 RPM Flanged PTO, Internal Control, 6 and 21 Spline Shafts (1.375 In. Diameter), Independent Wet Disc Clutch, Electro-hydraulic Engagement
HYDRAULIC SYSTEM
• Implement System: Open Center System, Engine Driven Gear Pump, 15.1 GPM (57 LPM), combined to 26 GPM (98 L/min) Flow Optional Cable-controlled Loader Joystick with Mid Valves
• 2 Mechanical Controlled Spool Valves (1 x DA KO FL + 1 x DA KO FL)
• Rear Linkage: ASAE Category II with Telescopic Ball Ends Lift Capacity at 24″: 7716 lbs (3500 kg) 2 Adjustable Rear Linkage Turnbuckles Standard Telescopic Stabilizers
• Swing Offset Drawbar with 350/400/500mm Positions, Cat 2 Clevis
ELECTRICAL
• 12 Volt DC, Negative Ground
• Intake Air Pre Heater
• High Capacity Wet Charge, Maintenance Free SAE 720 CCA Battery
• 80 AMP Alternator
• Ignition: Key with Safety Start
• Keyed Engine Shutoff
• Lighting: 4 Headlights, 2 Rear Marker Light Assemblies
• Mid Mounted Work Lights • Engine RPM Memory Switch • Rear Brake Lights • Standard 1 Rear Work Light
• 7 Pin ASAE Outlet Socket
• 30 Amp Auxiliary Electrical Socket
INSTRUMENTS
• Digital & Analog Instrument Panel with Performance Monitor
• Analog Engine Tachometer
• Analog Fuel Gauge
• Analog Engine Temperature
• Digital Transmission Display
• Digital Hour Meter
• Operation and Service Lights
OPERATOR ENVIRONMENT (PLATFORM MODELS)
• Flat Floor Platform – ISO Mounted
• Rubber Floor Mat
• Hand Rails with Glass Heat Shields
• Lever Controlled 3-Point Linkage with Easy Lift/Lower Option and Draft Control
• 2 Post Folding ROPS
• Tilt Steering Column
• Seat: Mechanical Spring Suspension with Armrests
• Retractable Seat Belt
• Cup Holder
• Pendant Style (Suspended) Foot Pedals
• Hand and Foot Throttle
• Left Side and Right Side Foot Step Entry
• External 3-Point Lift Control on Left Hand Side Fender